Started tinkering around and being creative. This was once a washing machine case...
Still rough from the hammer and needs to be blended a little more together as a unit.
| ordoprocinctus.com http://www.ordoprocinctus.com/forum/ |
|
| new backplate http://www.ordoprocinctus.com/forum/viewtopic.php?f=2&t=702 |
Page 1 of 2 |
| Author: | Sir Victor [ Sat Apr 23, 2011 6:55 pm ] |
| Post subject: | new backplate |
Started tinkering around and being creative. This was once a washing machine case... Still rough from the hammer and needs to be blended a little more together as a unit. |
|
| Author: | Sir Laygeaux [ Sun Apr 24, 2011 10:35 am ] |
| Post subject: | Re: new backplate |
nice |
|
| Author: | Sir Victor [ Sun Apr 24, 2011 5:07 pm ] |
| Post subject: | Re: new backplate |
Now, ribbed for her pleasure...  Those screws are temporary. The just hold the 3 plates together, so they can be shaped to fit together. It is not attached to leather, yet. It is simply tied to Manny's neck.  The backplate would fit a little closer to the back, but the screws protrude out a little. The ribs and the other spinal bones all protrude out of the metal. I painted the crevices flat-black, just because I felt like it. I kinda dig-it. I guess the Bone-armour project has begun! hmmm.....+3 on controlling 1D6 skeletons, +3 on controlling 1D4 zombies. |
|
| Author: | Sir Dallas [ Sun Apr 24, 2011 7:11 pm ] |
| Post subject: | Re: new backplate |
DARK PALADIN DEEAATTH KNIIIIIIIIIIIIIIIIIIIGHT! ! ! ! ! ! ! ! ! |
|
| Author: | Sir Dallas [ Sun Apr 24, 2011 7:18 pm ] |
| Post subject: | Re: new backplate |
Seriously though, that is awesome. Bad ass, dude, |
|
| Author: | Sir Eric [ Sun Apr 24, 2011 9:36 pm ] |
| Post subject: | Re: new backplate |
Love it! The curve of the spine is great. Gives it that old school, hunched, warrior skeleton look. |
|
| Author: | Sir Victor [ Sun Apr 24, 2011 10:46 pm ] |
| Post subject: | Re: new backplate |
I added just a wee bit more curve than normal. 1. That is the posture of Manmy. 2. It would be nice that it is designed for forward rolls. I'm gonna have fun with this project and just see what comes out. Sir Jason will be jealous! |
|
| Author: | Sir Kelly [ Fri Apr 29, 2011 8:54 pm ] |
| Post subject: | Re: new backplate |
Ha! I'm jealous. That's amazing work. |
|
| Author: | Sir Victor [ Sat Apr 30, 2011 6:03 pm ] |
| Post subject: | Re: new backplate |
Next the breastplate... First start off with a Wholefoods bag (or your favorite grocery bag)...  Then grab that washing machine metal (or your favorite stuff) and cut, shape, pound, cut excess, roll edges...etc.  Another couple of hours to get it shaped just right (still needs to be more rounded in the chest). I'll actually make a roll on the bottom edge (instead of a curved lip), then "skeletize" it!!! Moohahaha |
|
| Author: | Sir Victor [ Fri May 06, 2011 5:26 pm ] |
| Post subject: | Re: new backplate |
First step in skeletizing...at first I sketched it out in green, but it didn't look good. So, it was redrawn in black. Not anatomically correct, but good enough for my use!  After 3 hours of tiring beatings it is looking pretty sweet...This REALLY put some strength in the metal! (The picture makes it look crappy, but it looks better in person).  I still need to cleanup the edgings, smooth out areas of abuse, and re-alter the basic shape a bit. And of course, hit it with black paint in the right places. Forming the skeleton caused the overall shape to shift a little. It still fits nice, but I would like it to be as good as I can make it, and not just a quickly thrown out piece. 2-3 hours more and it should be ready for paint. To connect the backplate and breastplate, I'll need to make a pair of plates about 4"x5" each. These will fill in the gaps between the backplate and breastplate. |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|